Dieses Jobangebot ist archiviert und steht nicht mehr zur Verfügung.
Vakante Jobangebote finden Sie unter Projekte.
Vakante Jobangebote finden Sie unter Projekte.
Part Time Laborer
Eingestellt von OSRAM Sylvania
Projektbeschreibung
Description
JOB DESCRIPTION:
RESPONSIBLE TO PERFORM MULTIPLE JOB DUTIES INCLUDING BUT NOT LIMITED TO THE FOLLOWING:
1. Perform hand packing operations according to work instructions, specification sheets, and/or sketches as instructed.
2. Visually inspect lamps for breakage or defects such as obvious discoloration, blemishes, deformed or broken bases, missing etch, etc.
3. Obtain, orient, and load packed or unpacked lamps into cases, inserting pads as applicable. Obtain, assemble, and load trays, cases, cartons, and/or pallets.
4. Transfer lamps and feed packer according to prescribed methods and procedures. Utilize case/carton sealer or seal cases per instructions. Utilize conveyor and manually move cases to pallet.
5. Label cartons, cases, or pallets as instructed. Change labels as necessary.
6. Perform any of the following duties: put up totes, load machine, place in trays, pack to case, palletize, strap pallet, make up Versailles totes, move pallets using non-powered pallet jack. Shrink wrap lamps, cartons or pallets. Re-thread shrink wrap and change spool of film as necessary.
7. Contact designated personnel as required to maintain necessary supplies and remove completed work. Relocate supplies and completed work whenever possible to reduce or eliminate delays and work stoppages. Perform other related work such as put aside improperly sleeved lamps, obtain and return supplies, maintain SPC, production, and other required records as instructed, etc.
8. Rotate positions as necessary to meet production demands.
9. Perform each phase of the operation in full compliance with all company, state, and/or federal safety and environmental regulations.
10. Perform and assume full responsibility to practice good workmanship and fully meet the quality requirements of the job with respect to product or service provided to fellow employees or customers.
11. Notify designated personnel of any irregularities in materials, process, or equipment.
12. Maintain orderliness and cleanliness of assigned area (s) and observe company policies at all times.
Qualifications
JOB DESCRIPTION:
RESPONSIBLE TO PERFORM MULTIPLE JOB DUTIES INCLUDING BUT NOT LIMITED TO THE FOLLOWING:
1. Perform hand packing operations according to work instructions, specification sheets, and/or sketches as instructed.
2. Visually inspect lamps for breakage or defects such as obvious discoloration, blemishes, deformed or broken bases, missing etch, etc.
3. Obtain, orient, and load packed or unpacked lamps into cases, inserting pads as applicable. Obtain, assemble, and load trays, cases, cartons, and/or pallets.
4. Transfer lamps and feed packer according to prescribed methods and procedures. Utilize case/carton sealer or seal cases per instructions. Utilize conveyor and manually move cases to pallet.
5. Label cartons, cases, or pallets as instructed. Change labels as necessary.
6. Perform any of the following duties: put up totes, load machine, place in trays, pack to case, palletize, strap pallet, make up Versailles totes, move pallets using non-powered pallet jack. Shrink wrap lamps, cartons or pallets. Re-thread shrink wrap and change spool of film as necessary.
7. Contact designated personnel as required to maintain necessary supplies and remove completed work. Relocate supplies and completed work whenever possible to reduce or eliminate delays and work stoppages. Perform other related work such as put aside improperly sleeved lamps, obtain and return supplies, maintain SPC, production, and other required records as instructed, etc.
8. Rotate positions as necessary to meet production demands.
9. Perform each phase of the operation in full compliance with all company, state, and/or federal safety and environmental regulations.
10. Perform and assume full responsibility to practice good workmanship and fully meet the quality requirements of the job with respect to product or service provided to fellow employees or customers.
11. Notify designated personnel of any irregularities in materials, process, or equipment.
12. Maintain orderliness and cleanliness of assigned area (s) and observe company policies at all times.
JOB DESCRIPTION:
RESPONSIBLE TO PERFORM MULTIPLE JOB DUTIES INCLUDING BUT NOT LIMITED TO THE FOLLOWING:
1. Perform hand packing operations according to work instructions, specification sheets, and/or sketches as instructed.
2. Visually inspect lamps for breakage or defects such as obvious discoloration, blemishes, deformed or broken bases, missing etch, etc.
3. Obtain, orient, and load packed or unpacked lamps into cases, inserting pads as applicable. Obtain, assemble, and load trays, cases, cartons, and/or pallets.
4. Transfer lamps and feed packer according to prescribed methods and procedures. Utilize case/carton sealer or seal cases per instructions. Utilize conveyor and manually move cases to pallet.
5. Label cartons, cases, or pallets as instructed. Change labels as necessary.
6. Perform any of the following duties: put up totes, load machine, place in trays, pack to case, palletize, strap pallet, make up Versailles totes, move pallets using non-powered pallet jack. Shrink wrap lamps, cartons or pallets. Re-thread shrink wrap and change spool of film as necessary.
7. Contact designated personnel as required to maintain necessary supplies and remove completed work. Relocate supplies and completed work whenever possible to reduce or eliminate delays and work stoppages. Perform other related work such as put aside improperly sleeved lamps, obtain and return supplies, maintain SPC, production, and other required records as instructed, etc.
8. Rotate positions as necessary to meet production demands.
9. Perform each phase of the operation in full compliance with all company, state, and/or federal safety and environmental regulations.
10. Perform and assume full responsibility to practice good workmanship and fully meet the quality requirements of the job with respect to product or service provided to fellow employees or customers.
11. Notify designated personnel of any irregularities in materials, process, or equipment.
12. Maintain orderliness and cleanliness of assigned area (s) and observe company policies at all times.
Qualifications
JOB DESCRIPTION:
RESPONSIBLE TO PERFORM MULTIPLE JOB DUTIES INCLUDING BUT NOT LIMITED TO THE FOLLOWING:
1. Perform hand packing operations according to work instructions, specification sheets, and/or sketches as instructed.
2. Visually inspect lamps for breakage or defects such as obvious discoloration, blemishes, deformed or broken bases, missing etch, etc.
3. Obtain, orient, and load packed or unpacked lamps into cases, inserting pads as applicable. Obtain, assemble, and load trays, cases, cartons, and/or pallets.
4. Transfer lamps and feed packer according to prescribed methods and procedures. Utilize case/carton sealer or seal cases per instructions. Utilize conveyor and manually move cases to pallet.
5. Label cartons, cases, or pallets as instructed. Change labels as necessary.
6. Perform any of the following duties: put up totes, load machine, place in trays, pack to case, palletize, strap pallet, make up Versailles totes, move pallets using non-powered pallet jack. Shrink wrap lamps, cartons or pallets. Re-thread shrink wrap and change spool of film as necessary.
7. Contact designated personnel as required to maintain necessary supplies and remove completed work. Relocate supplies and completed work whenever possible to reduce or eliminate delays and work stoppages. Perform other related work such as put aside improperly sleeved lamps, obtain and return supplies, maintain SPC, production, and other required records as instructed, etc.
8. Rotate positions as necessary to meet production demands.
9. Perform each phase of the operation in full compliance with all company, state, and/or federal safety and environmental regulations.
10. Perform and assume full responsibility to practice good workmanship and fully meet the quality requirements of the job with respect to product or service provided to fellow employees or customers.
11. Notify designated personnel of any irregularities in materials, process, or equipment.
12. Maintain orderliness and cleanliness of assigned area (s) and observe company policies at all times.
Projektdetails
-
Einsatzort:
Pennsylvania, Vereinigte Staaten
-
Projektbeginn:
asap
-
Projektdauer:
Keine Angabe
- Vertragsart:
-
Berufserfahrung:
Keine Angabe
Geforderte Qualifikationen
-
Kategorie:
Sonstiges